Takes you off the installation requirements for dust fans!
Release time:2016-01-22
The dust removal fan mainly uses the inlet pipe, exhaust pipe, valve and other adjustment devices for connection and installation work. Generally, to ensure that its normal use performance is not affected, it is necessary to master the correct installation method. Generally, it will be installed during the installation process. There are detailed instructions for your reference. Of course, the installation requirements for different types of fans are also different. You need to perform reasonable installation according to the actual situation of the equipment. The following editors of Zibo induced wind fans will give you an analysis of the installation requirements. :
When the ventilation ducts are connected to the dust-removing fan, the flange surface should be flat and flat, and should not be pulled hard. Because the fan casing should not bear the weight of other parts, this can prevent the deformation of the casing and other pipeline installation. After completion, it is necessary to test whether the different axes of the unit meet the installation requirements.
The installation of the observation instruments and meters of the self-control equipment attached to the dust removal fan should be performed in accordance with the technical requirements in the technical file of the equipment. When the pipe fittings connected to the fan need to be cut or welded, in order to prevent the casing from deforming, the casing and pipes Only after disassembling all road accessories. In addition, the exposed part of the transmission device of the fan needs a protective cover. The air inlet and exhaust of the fan should be equipped with protection nets and other safety facilities to make the entire dust removal system run more stable.
The above is the introduction of the installation requirements of the dust removal fan. Through the above introduction, we can understand that during the entire installation process, we must pay attention to the inspection of the parts that need to be connected, and make sure that the installation work is correct. The installation work can ensure that the subsequent use of the fan is not affected. During installation, everyone must strictly follow the installation requirements. Do not perform installation work blindly.
When the ventilation ducts are connected to the dust-removing fan, the flange surface should be flat and flat, and should not be pulled hard. Because the fan casing should not bear the weight of other parts, this can prevent the deformation of the casing and other pipeline installation. After completion, it is necessary to test whether the different axes of the unit meet the installation requirements.
The installation of the observation instruments and meters of the self-control equipment attached to the dust removal fan should be performed in accordance with the technical requirements in the technical file of the equipment. When the pipe fittings connected to the fan need to be cut or welded, in order to prevent the casing from deforming, the casing and pipes Only after disassembling all road accessories. In addition, the exposed part of the transmission device of the fan needs a protective cover. The air inlet and exhaust of the fan should be equipped with protection nets and other safety facilities to make the entire dust removal system run more stable.
The above is the introduction of the installation requirements of the dust removal fan. Through the above introduction, we can understand that during the entire installation process, we must pay attention to the inspection of the parts that need to be connected, and make sure that the installation work is correct. The installation work can ensure that the subsequent use of the fan is not affected. During installation, everyone must strictly follow the installation requirements. Do not perform installation work blindly.